ABZolute Brochure

Loading...

Underneath Drawn Gland Packing Allows for direct mounting of actuation and ease of user adjustment. A rocker design gland flange and packing gland is utilized to insure 360 degree packing adjustment.

Extended Neck Allows for two inches of pipe insulation. Body High quality one-piece casting provides consistent uniformity. Body is available in Wafer, Lug, Double Flanged and Butt Welded. Body materials include WCB, CF8M, Duplex 2205, Monel, SMO 255 and many others.

Integrally Cast Disc Position Stop Machined position stop in the body locates the disc in the seat to achieve maximum sealing and seat life.

Seat Retainer Plate Constructed of the same material as the body, this robust multi-bolted seat retainer contains and supports the seat in both Bi-Directional Flow and Double Dead End Service for all soft seated valves.

Stem Manufactured as a standard of 17/4 PH Stainless Steel to provide maximum strength and stability for high torque applications. Other materials available upon request. Mounting Flange Designed to direct mount actuation for ease of installation and cost savings. No bracket is needed for manual actuation or for automatic automation up to 20 inches.

Packing PTFE is a cup and cone system. Graphite is die-formed rings for positive seals.

Blowout Proof Stem Blowout proof stem retention system is designed per API 609 standards and is located above the packing area.

Seat An advanced free floating, pressure assisted, solid seat design provides an interference and pressure assisted seal. This achieves a positive seal under both low and high pressure requirements. The 400 series seat does not rely on secondary located components such as O-Rings, springs, wire or metal bands to hold the seat in place. This allows for a longer service life with less maintenance. Disc Taper Pins Pins are offset from the center of the stem which places them in compression rather than in sheer. This gives them a yield point greater than the stem itself. Pins are welded in place after final assembly and testing. Disc Standard construction is 316 stainless steel with numerous alloys available. ABZolute 400 Series disc is engineered for a quick release from the seat which reduces torque and seat wear. Bearings Made of Graphite impregnated or reinforced PTFE impregnated 316 Stainless Steel to ensure long service life.

Soft Seat Design: • Solid seat, free floating, pressure assisted seal • No additional parts are required to maintain positive seal • ABZolute 400 series soft seated valves are rated full ANSI pressure • Seat and seat retainers are designed for Bi-Directional and Double Dead End Service • Class VI Bi-Directional shut off

Fire Safe Seat Design: • Solid seat with metal back up seat, free floating, pressure assisted seal • No additional parts are required to maintain positive seal • ABZolute 400 Series Fire Safe valves are rated full ANSI pressure • API 607 Fire Safe tested • Class VI shut off before fire and Class V shut off after fire

Metal Seat Design: • Machined metal seat, free floating, Uni-Directional, pressure Assisted seal • ABZolute 400 Series metal seated valves are rated full ANSI pressure • API 607 Fire Safe tested • Class V Uni-Directional shut off

Note: Soft and Fire Safe Seated valves are rated for full vacuum. Valves in vacuum service must be installed with vacuum on upstream side of valve. (Retainer side)

Wafer Pattern

Lug Pattern

401 - ANSI 150

402 - ANSI 150

421 - ANSI 300

422 - ANSI 300

451 - ANSI 600

452 - ANSI 600

Manufacture Standard End Connection Design Standard

Face to Face

Wafer Type, Lug Type

Flange Type

Butt Weld Type

ABZ Standard

API 609 & ANSI/ASME B16.34 API 607 (Fire Safe Test)

API 609 & ANSI/ASME B16.34

Optional Configurations

BS 5155

BS 5155

ABZ Standard

API 609 Category B MSS-SP-68 Table 1 ANSI/ASME B 16.10 Table8 ISO 5752 Table 1& BS 5155

ISO 5752 Table 6 BS 5155 Table 6 ANSI/ASME B 16.10 Table 6 (Only 2" & 2.5")

DIN 3202 ISO 5752 BS 5155

DIN 3202 ISO 5752 BS 5155

ANSI/ASME B 16.5 CL150,300,600 ANSI/ASME B 16.47 Series A CL150,300 MSS-SP-44:CL150,300,600 API 605 : CL.150, CL.300

ANSI/ASME B 16.5 CL150,300,600 ANSI/ASME B 16.47 Series A CL150,300 MSS-SP-44:CL150,300,600 API 605 : CL.150, CL.300

Optional Configurations

JIS B 2210 10K,16K,20K,30K,40K DIN02501, ISO 7005-1 PN10,PN16,PN20,PN25, PN40

JIS B 2210 10K,16K,20K,30K,40K DIN02501, ISO 7005-1 PN10,PN16,PN20,PN25, PN40

ABZ Standard

API 598 ANSI/ASME B 16.34 BS 1560 BS 5155

API 598 ANSI/ASME B 16.34 BS 1560 BS 5155

API 598 ANSI/ASME B 16.34

Optional Configurations

JIS B 2203, 2201 DIN 3230 ISO 7005 FCI 70-2 ANSI/ASME B 16.104 MSS-SP 61

JIS B 2203, 2201 DIN 3230 ISO 7005 FCI 70-2 ANSI/ASME B 16.104 MSS-SP 61

FCI 70-2 ANSI/ASME B 16.104 MSS-SP 61

Optional Configurations

ABZ Standard Flange Connection

Testing

Double Flanged Pattern Available

ANSI/ASME B16.34 & ANSI/ASME B 16.25

ISO 5752 Table 4 BS 5155 Table 6

Butt Welding according to ANSI/ASME B16.25

ABZolute - ANSI 150 SOFT SEAT - TEMP/PRESSURE

ABZolute - ANSI 150 FIRE SAFE AND METAL SEAT - TEMP/PRESSURE

The pressure/temperature rating Is determined by the seat or body rating whichever is less.

The pressure/temperature rating Is determined by the seat or body rating whichever is less.

ABZolute - ANSI 300

ABZolute - ANSI 300

SOFT SEAT - TEMP/PRESSURE

FIRE SAFE AND METAL SEAT - TEMP/PRESSURE

The pressure/temperature rating Is determined by the seat or body rating whichever is less.

The pressure/temperature rating Is determined by the seat or body rating whichever is less.

ABZolute - ANSI 600

ABZolute - ANSI 600

SOFT SEAT - TEMP/PRESSURE

The pressure/temperature rating Is determined by the seat or body rating whichever is less.

FIRE SAFE AND METAL SEAT - TEMP/PRESSURE

The pressure/temperature rating Is determined by the seat or body rating whichever is less.

Dimensions - Wafer & Lug Type ABZolute 400 Series ANSI - 150 (ANSI B16.5, ANSI B16.47 Series A) Size A D L C C1 G G1 K H F inch

Flange Dimensions B.C.D H T N1 N2

P.C.D

2 2.5 3 4 5 6 8 10 12 14 16 18 20 22 24 28 30 36 42 48

4.02 4.02 4.02 4.02 4.02 4.02 5.98 5.98 5.98 5.98 8.03 8.03 8.03 11.42 11.42 11.42 12.99 12.99 - -

4.75 5.50 6.00 7.50 8.50 9.50 11.75 14.25 17.00 18.75 21.25 22.75 25.00 27.25 29.50 34.00 36.00 42.75 49.50 56.00

0.750 0.750 0.750 0.750 0.875 0.875 0.875 1.000 1.000 1.125 1.125 - - - - - - - - -

5/8” x 11unc 5/8” x 11unc 5/8” x 11unc 5/8” x 11unc 3/4” x 10unc 3/4” x 10unc 3/4” x 10unc 7/8” x 9unc 7/8” x 9unc 1” x 8unc 1” x 8unc 1 1/8” x 8un 1 1/8” x 8un 1 1/4” x 8un 1 1/4” x 8un 1 1/4” x 8un 1 1/4” x 8un 1 1/2” x 8un 1 1/2” x 8un 1 1/2” x 8un

2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 8 8

4 4 4 8 8 8 8 12 12 12 16 16 20 20 20 28 28 32 36 44

3.25 4 3.25 4 3.25 4 3.25 4 3.25 4 3.25 4 5.00 4 5.00 4 5.00 4 5.00 4 6.50 4 6.50 4 6.50 4 10.00 8 10.00 8 10.00 8 10.00 8 10.00 8 11.73 8 11.73 8

0.43 0.43 0.43 0.43 0.43 0.43 0.55 0.55 0.55 0.55 0.83 0.83 0.83 0.75 0.75 0.75 0.75 0.75 0.91 0.91

0.750 0.875 0.875 0.875 0.875 0.875 1.000 - - - - - - - - - -

1.85 1.69 2.40 1.85 2.83 1.89 3.74 2.13 4.65 2.24 5.43 2.24 7.40 2.52 9.25 2.83 10.83 3.19 12.48 3.62 14.13 4.02 16.38 4.49 18.39 5.00 20.00 6.06 21.57 6.06 25.12 6.50 27.01 7.48 33.03 7.99 39.45 9.49 44.37 10.00

10.12 11.15 11.97 13.15 14.41 16.22 18.39 21.73 24.64 27.24 31.85 34.56 36.46 40.63 43.59 49.49 52.87 59.57 72.83 81.69

4.92 5.87 6.30 7.01 7.60 8.39 9.45 11.02 12.20 13.19 15.47 16.81 17.72 19.29 20.87 23.62 25.39 28.74 30.71 34.65

3.94 4.02 4.41 4.88 5.55 6.57 7.68 8.66 10.43 11.81 13.39 14.76 15.75 17.32 18.70 21.85 23.03 26.38 31.10 35.43

1.26 - 1.26 - 1.26 - 1.26 - 1.26 - 1.26 - 1.26 - 2.05 - 2.01 - 2.24 - 2.99 - 2.99 - 2.99 - 4.02 - 4.02 - 4.02 - 4.45 - 4.45 - 4.72 6.30 5.31 6.30

0.374 0.437 0.437 0.500 0.500 0.500 0.626 .25 x .25 .25 x .25 .31 x .31 .50 x .50 .50 x .50 .50 x .50 .75 x .50 .75 x .50 .75 x .50 .87 x .55 .87 x .55 1.10 x .63 1.26 x .71

0.551 0.626 0.626 0.748 0.748 0.748 0.874 1.126 1.126 1.374 1.874 1.874 2.126 2.555 2.555 2.555 3.146 3.146 3.933 4.720

Mounting Dimensions

N

H2

ANSI - 300 (ANSI B16.5, ANSI B16.47 Series A)

2 1.85 1.73 2.5 2.40 1.89 3 2.83 1.93 4 3.74 2.13 5 4.65 2.24 6 5.39 2.32 8 7.32 2.87 10 9.06 3.27 12 10.79 3.62 14 12.32 4.61 16 14.02 5.24 18 16.26 5.87 20 18.35 6.26 24 21.50 7.13 30 27.17 9.06 36 33.46 10.75 48 43.07 13.78

10.12 11.15 11.97 13.15 14.41 16.85 20.71 22.96 25.56 30.55 34.09 38.47 41.62 47.83 62.59 71.25 86.21

4.92 5.87 6.30 7.01 7.60 8.66 10.24 11.42 12.80 14.76 16.73 18.31 19.88 22.83 25.59 29.92 36.61

3.94 4.02 4.41 4.88 5.55 6.93 8.46 9.53 10.75 12.80 14.37 16.14 17.72 20.55 25.98 29.72 34.84

1.26 - 0.374 1.26 - 0.437 1.26 - 0.437 1.26 - 0.500 1.26 - 0.500 1.26 - 0.500 2.01 - .25 x .25 2.01 - .25 x .25 2.01 - .31 x .31 2.99 - .50 x .50 2.99 - .50 x .50 4.02 - .75 x .50 4.02 - .75 x .50 4.45 - .87 x .55 4.72 6.30 1.10 x .63 5.31 6.30 1.26 x .71 6.89 7.87 1.77 x .98

0.551 4.02 0.626 4.02 0.626 4.02 0.748 4.02 0.748 4.02 0.748 4.02 1.126 5.98 1.126 5.98 1.374 5.98 1.874 8.03 2.122 8.03 2.555 11.42 2.555 11.42 3.146 12.99 3.933 - 4.720 - 7.039 -

5.00 5.88 6.62 7.88 9.25 10.62 13.00 15.25 17.75 20.25 22.50 24.75 27.00 32.00 39.25 46.00 54.00

5/8” x 11unc 3/4” x 10unc 3/4” x 10unc 3/4” x 10unc 3/4” x 10unc 3/4” x 10unc 7/8” x 9unc 1” x 8unc 1 1/8” x 8un 1 1/8” x 8un 1 1/4” x 8un 1 1/4” x 8un 1 1/4” x 8un 1 1/2” x 8un 1 3/4” x 8un 2” x 8un 1 7/8” x 8un

2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 8 8

8 8 8 8 8 12 12 16 16 20 20 24 24 24 28 32 32

3.25 3.25 3.25 3.25 3.25 3.25 5.00 5.00 5.00 6.50 6.50 10.00 10.00 10.00 11.73 11.73 15.98

4 4 4 4 4 4 4 4 4 4 4 8 8 8 8 8 8

0.43 0.43 0.43 0.43 0.43 0.43 0.55 0.55 0.55 0.83 0.83 0.75 0.75 0.75 0.91 0.91 1.54

6.57 7.68 9.45 11.42 13.19 15.16 17.13 18.70 19.69 19.69 22.83

4.92 5.71 8.07 9.45 11.02 12.72 14.57 15.94 17.72 19.29 23.03

1.18 - 1.26 - 2.24 - 2.99 - 2.99 - 4.02 - 4.02 - 4.02 - 4.45 - 4.72 5.91 4.72 6.30

0.748 0.874 1.374 1.874 1.874 2.358 2.555 2.555 3.146 3.933 3.933

6.62 0.875 3/4” x 10unc 8.50 1.000 7/8” x 9unc 11.50 - 1” x 8unc 13.75 - 1 1/8” x 8un 17.00 - 1 1/4”x 8un 19.25 - 1 1/4” x 8un 20.75 - 1 3/8” x 8un 23.75 - 1 1/2” x 8un 25.75 - 1 5/8” x 8un 28.50 - 1 5/8” x 8un 33.00 - 1 7/8” x 8un

2 2 4 4 4 4 4 4 4 4 4

8 8 12 12 16 20 20 20 20 24 24

3.25 5.00 4 5.00 4 6.50 4 6.50 4 10.00 8 10.00 8 10.00 8 10.00 8 11.73 8 11.73 8

0.43 0.55 0.55 0.83 0.83 0.75 0.75 0.75 0.75 0.91 0.91

ANSI - 600 (ANSI B16.5)

3 4 6 8 10 12 14 16 18 20 24

2.91 3.78 5.20 6.85 8.78 10.59 11.81 13.74 15.59 17.72 21.50

2.17 2.52 3.07 4.06 4.61 5.51 6.10 7.01 7.87 8.50 9.13

12.67 14.65 19.76 23.86 27.20 31.90 35.72 38.66 41.86 49.61 56.88

0.500 0.626 .31 x .31 .50 x .50 .50 x .50 .75 x .50 .75 x .50 .75 x .50 .87 x .55 1.10 x .63 1.10 x .63

• 26” and larger API Flange Patterns are available - consult factory • Double Flanged Patterns are available - consult factory

4.02 5.98 5.98 8.03 8.03 11.72 11.42 11.42 12.99 - -

• Larger sizes available • Custom sizes available

Cv Value of Series 400 ABZolute Seal Double Offset High Performance Valves Cv is defined as the volume of water in U.S.G.P.M. that will flow through a given restriction or valve opening with a pressure drop of one (1) PSI at room temperature. Recommended control angles are between 25°-70° open. Preferred angle for control valve sizing is 60°-65° open. This chart is calculated and is to be used as a guide only.

ANSI - 150 Size Inch mm

Class

10°

2 50 2 1/2 65 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 22 550 24 600 26 650 28 700 30 750 32 800 34 850 36 900 40 1000 42 1050 48 1200

150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150

2 3 5 9 16 25 55 85 115 150 200 265 345 375 485 550 650 750 850 1000 1100 1550 1650 2350

20°

Angle of Opening (Degrees) 30° 40° 50° 60°

70°

80°

90°

5 12 19 9 21 33 14 32 50 25 57 90 44 104 163 65 150 235 130 305 480 205 475 750 280 655 1025 355 830 1305 475 1115 1750 630 1475 2315 830 1935 3040 975 2275 3580 1265 2955 4640 1450 3350 5300 1750 4050 6350 2000 4600 7250 2350 5450 8600 2750 6450 10150 2950 6900 10900 4000 9300 14650 4350 10100 15900 6100 14200 22350

32 54 82 148 266 380 785 1225 1680 2140 2860 3790 4975 5855 7590 8650 10350 11900 14050 16650 17800 23950 26000 36550

45 77 116 209 377 540 1110 1735 2380 3030 4055 5365 7050 8295 10755 12250 14650 16850 19900 23550 25200 33900 36850 51800

65 111 168 303 548 785 1615 2520 3450 4395 5880 7790 10230 12035 15605 17800 21300 24400 28850 34200 36600 49200 53450 75150

81 88 138 150 209 227 377 410 681 740 975 1060 2005 2200 3135 3400 4290 4700 5465 5900 7310 7900 9680 10500 12715 13800 14960 16300 19405 21100 22100 24000 26450 28800 30350 33000 35850 39000 42500 46200 45500 49400 60500 66500 65000 72200 91450 101600

5 9 14 25 44 60 110 175 250 325 415 590 760 1135 1750 2700

12 21 32 57 104 139 260 415 580 755 970 1375 1770 2645 4050 6300

19 33 50 90 163 218 410 650 910 1185 1520 2165 2780 4155 6400 9900

32 45 54 77 82 116 148 209 266 377 357 506 670 945 1065 1505 1495 2115 1940 2750 2490 3525 3540 5015 4555 6450 6800 9635 10450 14800 16200 22900

65 111 168 303 548 735 1375 2185 3070 3985 5120 7275 9360 13980 21500 33250

81 138 209 377 681 914 1710 2720 3815 4955 6365 9045 11635 17380 26700 41350

88 150 227 410 740 995 1900 3000 4100 5400 6900 9800 12600 18900 29000 44900

9 15 38 70 120 165 220 305 325 470 750

21 34 88 160 285 380 515 705 765 1095 1750

33 53 139 250 450 600 810 1110 1200 1715 2750

54 87 228 410 735 980 1330 1820 1965 2810 4500

112 180 468 845 1510 2015 2730 3735 4035 5775 9250

139 224 581 1050 1875 2505 3395 4645 5015 7180 11500

151 243 630 1100 2000 2700 3700 5100 5500 7800 12500

ANSI - 300

2 2 1/2 3 4 5 6 8 10 12 14 16 18 20 24 30 36

50 65 80 100 125 150 200 250 300 350 400 450 500 600 750 900

300 2 300 3 300 5 300 9 300 16 300 24 300 45 300 75 300 105 300 135 300 175 300 245 300 315 300 435 300 650 300 1000

ANSI - 600

3 4 6 8 10 12 14 16 18 20 24

80 100 150 200 250 300 350 400 450 500 600

600 600 600 600 600 600 600 600 600 600 600

3 5 15 30 50 70 90 125 135 195 300

77 124 322 580 1040 1390 1880 2575 2780 3980 6400

STANDARD PARTS SCHEDULE

1 Body.....................................A216-WCB Carbon Steel A351-CF8M 316 Stainless Steel 2 Seat Ring...................................Soft / Metal / Fire Safe 3 Disc..........................A351-CF8M (316 Stainless Steel) 4 Stem........................................ 17/4 PH Stainless Steel 5 Retainer Ring..................................316 Stainless Steel 6 Packing................................................. PTFE Graphite 7 Packing Gland................................316 Stainless Steel 8 Gland Flange............A351-CF8M (316 Stainless Steel) 9 Gland Bolt.............................................Stainless Steel 10 Nut........................................................Stainless Steel 11 Spring Washer.......................................Stainless Steel 12 Bush Bearing................ RTFE + S.S. or Graphite + S.S. 13 Disc Pin.................................................Stainless Steel 14 Packing Retainer....................................Stainless Steel 15 Cap Packing...................................... PTFE or Graphite 16 Cap.......................................A216-WCB Carbon Steel A351-CF8M 316 Stainless Steel 17 Cap Bolt................................................Stainless Steel 18 Spring Washer.......................................Stainless Steel 19 Seat Retainer.........................A216-WCB Carbon Steel A351-CF8M 316 Stainless Steel 20 Retainer Bolt..........................................Stainless Steel

8 5 7 9 6 14 12

11 10

1

13

3

2 19

4

20

Available Materials •Hastelloy •Duplex 2205 •ALX6N •SMO 254/255 •Monel Other materials are available on request.

12 5 15 16 18 17

Loading...

ABZolute Brochure

Underneath Drawn Gland Packing Allows for direct mounting of actuation and ease of user adjustment. A rocker design gland flange and packing gland is...

2MB Sizes 1 Downloads 31 Views

Recommend Documents

Brochure
Yonge and Eglinton. Sitting a few blocks west of Mount Pleasant. Road and just one block south of Eglinton, this is the

Brochure
Consulta del Comportamiento. Para solicitar una consulta: ... El proyecto de consulta proporciona servi- cios de interve

Brochure
Kids Game 7one __. CLUB HOUSIE निvं)ुं, - 1े_ |...े-', ', `्_ ँ _ OUTIDOOR OGAMES. _\\े_=७.* , _ _

Brochure Holders and Displays - the brochure holder and brochure
Everything you need and EASY online ordering. All the best brochure holder and brochure display systems.

brochure holder and display systems: Brochure Holders and Brochure
We supply a comprehensive range of brochure holders, business-card holders, menu holders, postcard holders, wall display

Placement Brochure
implementing innovative ideas and contributing significantly to the growth and development of their organizations. The r

brochure - Hondalatincaribbean
Sistema de Audio con Pantalla Táctil. Audio with Touch Screen. Este nuevo y asombroso panel táctil te permite acceder

OliverVelez Brochure
founder and former CEO of Pristine Capital Holdings,. Inc. which he grew ... including Strategies for Profiting on Every

Brochure PEEK-OPTIMA HA Enhanced Brochure Download
HA Enhanced has similar properties to PEEK-OPTIMA. Natural, but also encourages enhanced bone on-growth. PEEK-OPTIMA HA

Download Brochure
production and marketing preceded every other concern. ... compliance by making every user to follow SOPs. » Self-guidi